100W Single Output Industrial Din Rail Power Supply 24V 4.2A PEREL

Caractéristiques :

Universal AC input / Full range
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Isolation class II
- indicateur LED d'alimentation
- No load power consumption<1W
- 100% full load burn-in test
- 3 years warranty
- usage professionnel uniquement
- Cet appareil doit être installé par un technicien qualifié.

Spécifications :

OUTPUT:
- tension CC: 24V
- courant nominal: 4.2A
- plage de courant: 0 ~ 4.2A
- RIPPLE & NOISE (max.) Note.2: 150mVp-p
- plage de réglage de tension: 24 ~ 29V
- VOLTAGE TOLERANCE Note.3: ±1.0%
- régulation de ligne: ±1.0%
- régulation de charge: ±1.0%
- temps de démarrage, de montée: 2700ms, 80ms/230VAC 2700ms, 80ms/115VAC at full load
- temps de maintien (typ.): 50ms/230VAC 18ms/115VAC at full load
- rated power: 100 W
- entrée:
- plage de tension: 88-264VAC, 124-370VDC
- FREQUENCY RANGE: 47 ~ 63Hz
- rendement (typ.): 89%
- courant CA (typ.): 3A/115VAC 1.6A/230VAC
- courant d'appel (typ.): COLD START 30A/115VAC 45A/230VAC
- protection:
- OVERLOAD Note.6:
-
- 105 ~ 135% rated output power
-
- Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE:
-
- 30 ~ 35V
-
- Protection type : Shut down o/p voltage, re-power on to recover
- OVER TEMPERATURE:
-
- 90°C ±15°C (RTH2) detect on heatsink of power transistor
-
- Protection type : Shut down o/p voltage, re-power on to recover
- environnement:
- WORKING TEMP.: -20 ~ +60°C (Refer to "Derating Curve")
- humidité de service: 20 ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY: -40 ~ +85°C , 10 ~ 95% RH
- TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 50°C )
- vibration: Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes, Mounting: Compliance to IEC60068-2-6 486K
- SAFETY & EMC (Note 4):
- SAFETY STANDARDS: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
- tension d'isolation: I/P-O/P:3KVAC
- ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH
- EMC EMISSION: Compliance to EN61204-3, EN55022 Class B, EN61000-3-2,-3
- EMC IMMUNITY: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
- autres:
- MTBF: 486K hrs min. MIL-HDBK-217F (25°C )
- dimensions: 100 x 93 x 56mm
- PACKING: 0.35Kg, 36pcs/13.6Kg/0.89CUFT

Référence	5410329583170
Référence Fabricant	PER-DR-100-24
Marque	PEREL

Posez votre question

Envoyer

Nom

Adresse e-mail